Advertisement
3
2
INPUT
VOICE
LEVEL
INPUT
GAIN
4
LINE MIC
MUSIC VOCALS
3
2
INPUT
VOICE
LEVEL
INPUT
GAIN
4
MUSIC VOCALS
LINE MIC
BT
LEVEL
BT
AUX IN
PAIR
ON/OFF
5
LINE OUT
MASTER
MODEL:HiPAC10PRO
Designed in the USA
Made in China
This device complies with Part 12 of
the FCC Rules. Operation is subject
to the following two
conditions:(1)this device may not
SERIAL NUMBER
cause harmful interference,
and(2)this device must accept any
interference received, including
interference that may cause
undesired operation.
POWER
INPUT GAIN
LEVEL
Adjust this
CHANNEL VOICING
HiPAC Control Panels
BLUETOOTH PAIRING INSTRUCTIONS:
To connect your Bluetooth device to the
Kustom Bluetooth receiver for the first time,
1
navigate to the Bluetooth settings menu on
your Bluetooth enabled device. Ensure that
Bluetooth is enabled and your Kustom
product is powered on. Perform a scan for
1
available devices. Select and pair to the
Kustom product in the list of available
devices. Enter 0000 for the passcode if
prompted. Once paired, a connection can
be established. Depending on the device,
future connections may be established
automatically when a previously paired
Bluetooth device is in range of the Kustom
Bluetooth receiver. The Bluetooth receiver
in Kustom Bluetooth products is an A2DP
device and will work with other A2DP
compatible Bluetooth devices including
most smart phones. Additional hardware
and/or driver software may be required for
computers with integrated Bluetooth
adaptors due to a lack of support for A2DP
devices by some operating systems. A2DP
protocol only allows for one to one device
connections. Therefore, only one Bluetooth
device can be connected to a Kustom
Bluetooth product at one time. Similarly, a
Bluetooth device can only be connected to
one Kustom Bluetooth
product at one time. Plugging a 1/8"
connector into the AUX jack disables the
Kustom Bluetooth receiver.
Advertisement
