O3 Pure G3 User Manual page 7

G3 Eco Laundry System
Indicators & Alarm System
Light Indicators
The vertical LED bar, viewed on the cover of the unit, has two states of operation:
Blue light indicates normal operation
Flashing red light indicates that the ozone generator is not operating properly. Please
contact your dealer for service or visit , www.o3pure.com
LED Bar Diagram
When the unit is plugged in and on stand-by mode,
It is suggested to choose "H" if you need to clean strong stains and white
clothes for better result.
It is suggested to choose "L" to clean lightly soiled or delicate clothing (i.e.
silk and linen)
When there isn't an O3 signal on the LED bar it is indicating that there isn't
any ozone in the water.
Note: You need to initially touch the key on the left side of the unit to
choose different ozone levels while the washer is running.
The water drop will be in red if water leaks. Your Eco-laundry G3 is equipped
with an internal leak detector. If a leak
of the unit, the water will accumulate on the bottom panel. The sensor will
set off an audible alarm and will automatically turn the unit off. This alarm
will continue to buzz until the leak is stopped and/or the unit is unplugged.
If this alarm should occur you should unplug the unit immediately and then
turn off the cold water valve. Contact Customer Service.
Please Visit www.o3pure.com
Page 6
happens to develop on the inside
User Manual