In The Box; Preparing To Operate The Pressure Washer - Challenge FB510 Original Instruction Manual

In the Box

Parts
A D
high pressure spray lance
washer
E
water inlet male
B
trigger gun with connector (attached
hose attached to the machine)
C F
extend lance nozzle pin
A
E
C
D
F
If there are any parts missing, please call the customer helpline on 01904 727508
Customer Helpline 01904 727508
10
www.coreservice.co.uk
G instruction manual
B
G

Preparing to Operate the Pressure Washer

Step 1 Fit the high pressure hose to the washer
WARNING! Always wear safety gloves when doing any work on the pressure washer.
Connect the high pressure hose to the pressure washer. Attach high pressure hose to the
machine's water outlet (hand tighten only).
Step2 Assemble the lower handle
Insert the extend lance to trigger gun, and twist 1/4 turn to lock in position. Insert the spray lance to
extend lance, and twist 1/4 turn to lock in position.
Note! Check that it is firmly securely located in place.
Step 3 Connect garden hose and inlet adapter
Before you attach your water hose (not included), run the water through to eliminate any air in the
hose to avoid air locking.
Customer Helpline 01904 727508
www.coreservice.co.uk
11