LY
TO ASSEMBLE
AND ATTACH
GRASS
CATCHER
(See Figs. 3A thru 4)
•
Insert leg of tubular frame through front opening of
grass catcher and thread frame into sewn hem of bag.
NOTE: Keep bag hem gathered on the straight leg of the
tubular frame.
o
When frame comes out the other end of sewn hem,
immediately work the end of frame down inside the bag
as shown in inset.
*
S1ide sewn hem evenly around the tubular frame until
both ends of frame are exposed out of the front open-
ing.
,
Assemble lower frame to tubular frame as shown. Be
sure handte is outside of bag and frames are fufly
seated as shown in inset.
•
Slip vinyl bindings over frame.
NOTE:
If vinyl bindings are too stiff, hold them in warm
water for a few minutes.
If bag gets wet, let it dry before
using.
Close the flip lid. Flip lid must be closed while operating
lawn mower.
,
Lift the rear door on the mower housing and place the
grass catcher frame onto the formed tabs on the rear
door hinge bracket.
o
The grass catcher
is secured to the lawn mower
housing when the rear door is lowered onto the grass
catcher frame.
Oo,,owomow°,
I
_out
clipping deflector
or approved
grass catcher in place. Never attempt
I
to operate the lawn mower with the rear
door removed or propped open.
TUBULAR FRAME
SEWN
HEM
SEWN HEM
FLIP LID
TUBULAR
FRAME
ames must
fully seated}
//
FiG. 3B
LOWER FRAME HANDLE
\
GRASS
CATCHER
FRAME
FORMED
TABS
FiG. 4
FiG. 3A
7