Wall Mounting - Silvercrest STS 12 B2 Operating Instructions Manual

♦ Align the light surface
GB
the walls and/or ceiling.
♦ Connect the power adapter
inserting the barrel connector
the power cable through the cable conduit
appliance.
♦ Connect the power adapter
NOTE
► It is best to check the location and alignment of the
appliance in the dark from outdoors and through the
window. Only in this way can you assess whether the
appliance is aligned so that it appears as if someone
is watching television inside.
If necessary, realign the appliance.

Wall mounting

RISK OF ELECTRIC SHOCK!
Ensure that there are no power cables or other
conduits or pipes in the wall at the location where
you intend to bore the holes for the wall holder. It
would be a potentially fatal risk to bore into a current
carrying electric cable!
Select a suitable mounting location for the appliance:
―
―
―
―
10
at the rear side of the appliance. If required, route
The TV Simulator may not be directly visible from
outdoors.
The flickering generated by the TV simulator must be
visible on the walls and/or ceiling from outdoors.
A power socket must be easily accessible.
The TV Simulator must be installed such that it can
be influenced by the twilight. This means that it must
be able to detect light from outside!
so that the flicker is visible on
with the appliance by
into the plug socket
into a power socket.
on the
STS 12 B2