Connecting Devices; Mounting Power Supply Connector; Connecting Cables - Beckhoff CU8006-0000 Installation And Operating Instructions Manual

3.3 Connecting devices

The power supply plug must be withdrawn
Please read the documentation for the external devices prior to connecting them!
Attention
During thunderstorms, plug connector must neither be inserted nor removed!
When disconnecting a plug connector, always handle it at the plug. Do not pull the
cable!

3.3.1 Mounting power supply connector

The connector for the power supply has a clamp. It will be installed with a screwdriver:
1.
1. Insert screwdriver into the left hole.
2. Plug bared cable into right hole.
3. Remove screwdriver.
4. The Cable is installed.

3.3.2 Connecting cables

The connections are documented in the section
There are the following options when connecting the CU8006-0000:
• Connect the CU8006-0000 USB hub with the power supply and connect the USB type B port
before connecting the downstream ports.
• Only connect the USB type B port and the downstream ports. When operated without power
supply the total current of all 4 downstream ports must not exceed the maximum current at the
Industrial PC.
• Only connect the power supply of the CU8006-0000 USB hub and the downstream ports. Now
the CU8006-0000 can be used as USB power supply, e.g. for charging USB devices.
It is useful to connect the power supply first (via USB type B port and/ or 24 V DC), then connect the
downstream ports.
CU8006-0000
2.
Product
3.
Description.
Installation
4.
11