Night Owl Smart Safe NCS-03WFB Quick Setup Manual page 5

4
Press and hold the "Reset Button" for 5 seconds. The Status Light turns blue and blinks.
5
Create your 4-digit Access Code using the keypad on the safe (can be any 4-digit combination).
Note: You have 30 seconds to program the code. The safe beeps three times after entering the 4 digit code.
6
Close the safe and press "OK" (Keypad Status Light turns solid yellow). Re-enter the Access
Code to open the safe.
Note: After entering the wrong password 5 times, the safe locks the keypad for 1 hour.
BEEP
BEEP
BEEP
4