Advertisement
V-BELTS
Check V-belts for deterioration and wear after 100 hours of
operation
and replace if necessary_ The belts are not
adjustable° Replace belts if they begin to slip from wear_,
o
TRANSAXLE
COOLING
°
Keep transaxle free from build_up of dirt and chaff which
°
can restrict cooling.
°
ENGINE
LUBRICATION
Only use high quality detergent oil rated with API service
classification SF or SG. Select the oil's SAE viscosity grade
according to your expected operating temperature°
SAE VISCOSITY GRADES
L
-20"
04
30"
32 =' 40"
60 _
60 °
!00 °
°C
0"
.... .30°
-20°
-10°
,,,,!0_
....................
20=
30'
4 o
TE, MPERATURE
RANGE ANTICIPATED
BEFORE
NEXT OIL CHANGE
NOTE:
Although multi-viscosity
oils (5W30, 10VV30 etc.,)
improve starting in cold weather, these multi-viscosity oils
wilt result in increased oil consumption when used above
32°F. Check your engine oil level more frequently to avoid
possible engine damage from running low on oil,
Change the oil after the first two hours of operation and
every 50 hours thereafter
or at least once a year if the
tractor is not used for 50 hours in one year.
Check the crankcase oil level before starting the engine
and after each eight (8) hours of operation_ Tighten oil fill
cap/dipstick securely each time you check the oil level
TO CHANGE ENGINE OIL (See Fig_ 15)
Determine temperature range expected before oil change
All oil must meet API service classification SF or SG,
°
o
Be sure tractor is on level surface
Oil will drain more freely when warm,
Catch oi! in a suitable container,,
Remove oil fill cap/dipstick,
Be careful not to allow dirt
to enter the engine when changing oil,,
Remove drain plugo
After oil has drained completely, replace oil drain plug
and tighten securely.
Refill engine with oil through oil fill dipstick tube. Pour
slowly. Do not overfill.
For approximate capacity see
"PRODUCT
SPECIFICATIONS"
on page 3 of this
manual.
Use gauge on oil fill cap/dipstick
for checking level.
Insert dipstick into the tube and rest the oil fill cap on the
tube. Do not thread the cap onto the tube when taking
reading.,
Keep oil at "FULL" line on dipstick. Tighten
cap onto the tube securely when finished.
AIR CLEANER
KNOB
COVER
NUT
FOAM
PRE-CLEANER
AIR
SCREEN
PAPER CARTRIDGE
CLEANER
BASE
:ILL
CAP/DIPSTICK
DRAIN
PLUG
FIG. 15
17
Advertisement
