Device Object Properties - DEOS RTC 1010 User Manual

Device Object Properties

The following table lists all the BACnet properties supported for the device object. The W indicates that the property is
writable using the BACnet WriteProperty service.
Table 2 - Device Object Properties
Property
Object_Identifier
Object_Name
Description
Object_Type
System_Status
Vendor_Identifier
Vendor_Name
Model_Name
Firmware_Revision
Application_Software_Version
Protocol_Version
Protocol_Revision
DataBase_Revision
Max_APDU_Length_Accepted
Segmentation_Supported
APDU_Timeout
Number_of_APDU_Retries
Local_Time
Local_Date
UtC_Offset
Daylight_Savings_Status
Backup_Failure_Timeout
Configuration_Files
Last_Restore_Time
Backup_And_Restore_State
Backup_Preparation_Time
Restore_Completion_Time
Restore_Preparation_Time
Protocol_Services_Supported
Protocol_Object_Types_Supported
Object_List
Device_Address_Binding
Max_Master
Max_Info_Frames
Active_COV_Subscription
Property_List
www.deos-controls.com
 Programmable where the instance part of the Object_Identifier is in the range of
0-4194302
 The device instance must be unique system-wide
 The default value for the device instance=877010 (Vendor_Identifier*1000)
RTC 1010, programmable up to 32 Bytes
Programmable up to 32 Bytes (default: RTC 1010 Zoning System)
Device
Operational
Always 877
Always DEOS Controls
Example, RTC1010
currently, 1.0
currently, 1.01
Always 1
Always 14
Default 0; incremented if Object Name and/or device ID change
Always 480
(3) = No Segmentation
6,000
Always 3
00:00:00
02-Jan-2015 (Fri)
-300 minutes
False
300
File-1
2015-01-01 (Thu), 00:00:00:00
IDLE
0
0
0
 subscribeCOV
 atomicReadFile
 atomicWriteFile
 readProperty
 readPropertyMultiple
 WriteProperty
 writePropertyMultiple
 analog-input
 analog-output
 analog-value
 binary-input
 binary-output
 binary-value
143
Always empty
Programmable in the range of 1-127 (default: 127)
Always 1
Empty by default. COV subscription will be lost on a power cycle.
List of properties that exist within the object.
RTC 1010 Unit Controller
BACnet Communication Module User Guide
Value
 deviceCommunicationControl
 reinitializeDevice
 unconfirmedPrivateTransfer
 timeSynchronization
 who-Has
 who-Is
 utcTimeSynchronization
 subscribeCOVProperty
 device
 file
 program
 schedule
 multi-state-value
Writable
W
W
W
W
W
W
W
W
W
W
Page | 5