Table of Contents
Advertisement
Start playback
1. When the unit is switched on, slide the AM/FM/CD/iPod/AUX switch to select
"CD" mode.
2. Press the OPEN button to open the CD compartment and insert a CD or CD-
R/RW disc into the CD compartment with the label side facing outwards.
3. The unit will read the disc and after reading, the total number of tracks will be
displayed. Press the
playback, the track number is displayed.
Pause playback
Press the
button to pause playback and " " will flash. Press it again to resume
playback.
Stop playback
Press the
button to stop playback. Then, you can press the
playback from the first track.
Search function
Skip to next/ previous track
1. Press the
button to skip to the next track.
2. Press the
button to skip to the previous track.
Searching within a track
During playback, hold down the
and then release the button. It will resume normal playback from that point.
REPEAT playback
Press the REPEAT button repeatedly to select repeat playback mode:
Press it once to repeat the current track and "REP" is displayed. Press it twice to
repeat all the tracks and "REP ALL" is displayed. Press it a third time to cancel
the repeat function.
PROGRAM playback
This function allows you to program up to 20 tracks to be played in the desired
order.
Note: Programming only works when playback is stopped.
Programming CD tracks
1. In STOP mode, press the PROG button and the track number "PROG 01" will
flash.
2. Press the
/
3. Press the PROG button to confirm.
4. Repeat steps 2 and 3 to program the other tracks.
5. To play the program, press the
6. To clear the program, press the
go to standby mode.
CD OPERATION
button to start playback from the first track. During
or
buttons to select a track number.
button.
button twice, open the CD compartment or
GB- 5
button to go fast backwards or forwards
button to start
Advertisement
Table of Contents
