Using The Home Monitor; Setting Up; Power On Or Off The Home Unit - Kodak CHERISH F680 User Manual

3. USING THE HOME MONITOR

Please read these instructions carefully, and be aware
that Home Monitor is only intended as an aid.
It is not a substitute for responsible adult supervision.

3.1 Setting Up

• Make sure that the Home Unit is switched on.
• Place the Home Unit in a convenient location (e.g.
on a table) and point the camera lens towards the
area you want to monitor.
NOTE:
• Do not place the Home Unit within reach of a child
or baby! If there is interference with the picture or
sound, try moving the units to different locations,
and ensure that they are not close to any other
electrical equipment.
• If you hear a high pitched noise. This is not a fault.
The unit is designed to be operated at some
distance apart. So move the units further apart.
• It is recommended to use a Class 10 SD Card.
(Insert the SD card with the labels facing towards
you)
Page | 16

3.2 Power On or Off the Home Unit

• Slide the ON/OFF switch to the ON position to
switch on the Home Unit. The power indicator
lights up in blue.
• Slide the ON/OFF switch to the OFF position to
switch off the Home Unit. The power indicator goes
off if the battery is not being charged, or lights up
in red if it is charging.
Using the Home Monitor