Captron CHT5 Original Operating Instructions page 11

7.1.4 Mounting the colored cover ring
► Place the cover ring and press
close to the button surface. The
cover ring must be flush with the
entire button surface.
7.2 Assembly, outside
7.2.1 Cleaning the surface
Requirements: The surface is level and sound.
For optimal gluing results, the surface must be cleaned thoroughly at the
position where the button will be located.
► Clean the surface with cleaning
cloth A.
► Dry the surface with a lint-free
cloth.
► Clean the surface with cleaning
cloth B.
► Dry the surface with a lint-free
cloth.
CHT5 / CHT51 1.2 11/15