T1 Port <P> Enable; T1 Port <P> Encoding; T1 Port <P> Locallb - FibroLAN MetroStar MMM-01 User Reference Manual

Scope All T1 models
Syntax config <s> <c> <loc|rem> t1 port <p> enable <on|off>
Description Enable or disable an T1 port.
Default setting On
Options None
Example MetroStar>config 3 1 loc t1 port 1 enable off
Scope PCM110-xT1
Syntax config <s> <c> loc t1 port <p> encoding <b8zs|ami>
Description Set the Tx and Rx encoding in T1 mode (B8ZS or AMI).
Default setting B8ZS
Options None
MetroStar>config 3 1 loc t1 port 1 encoding ami
Example
Scope All T1 MetroStar modules
config <s> <c> <loc> t1 port <p> locallb <on|off>
Syntax
Description Enable or disable local loopback on a module's T1 port.
When enabled, T1 signals coming in on the port will be
looped back locally.
Default setting Off
Options None
MetroStar>config 3 1 loc t1 port 1 locallb on
Example
t1 port <p> enable
t1 port <p> encoding
t1 port <p> locallb
97