Table of Contents
Advertisement
PREPARATION FOR USE
Carefully unpack the Main unit from its carton (do not attempt to
connect anything at this stage).
You should have the following items:
Packing included
1. Manual Book
2. Main Unit
3. Charging Cable
4. AUX cable
5. Bag
If any of these items are missing, consult your dealer. Keep any packaging
in case you want to transport the main unit at some later date.
Power On
Turn the Volume Knob to the ON side to turn on the unit.
Adjusting the sound
To adjust the sound, turn the Volume Knob located on the Right side of
your system in any mode.
USING THE TURNTABLE
1.Power on the unit. The unit was set on Turntable mode, and along with
voice prompt: Turntable Mode. Shortly
press MODE key also can switch into PH
(phonograph) status.
2. Under Turntable mode, the indicator
LED light is solid blue.
3.Place the record on the turntable.
4.Select the speed of record: 33, 45, 78
rpm according to vinyl to played.
5.Remove the stylus guard and push the lift lever upward to raise the
tone arm from the arm park, and then move the cartridge holder over
the record gently, now the platter will run automatically .Then put down
the lever, the tone arm would drop and touch record surface gently. Now
users can enjoy their favorite songs.
Hide quick links:
Advertisement
Table of Contents
