Coca-Cola CCT01 Operating Instructions Manual

Coca-Cola CCT01 Operating Instructions Manual

Retro turntable with bluetooth speaker

Advertisement

RETRO TURNTABLE WITH BLUETOOTH SPEAKER
CCT01
- OPERATING INSTRUCTIONS -

Advertisement

Table of Contents
loading

Summary of Contents for Coca-Cola CCT01

  • Page 1 RETRO TURNTABLE WITH BLUETOOTH SPEAKER CCT01 - OPERATING INSTRUCTIONS -...
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS * This product is designed for use in moderate climates. Do not use or install this unit where it would be exposed to direct sunlight or in extremely hot temperatures, or near a radiator, stove or appliance that produces heat.
  • Page 3: Location Of Controls

    LOCATION OF CONTROLS 45 RPM Adapter 11.Play/Pause 12.NEXT Button Speaker 13.AUX OUT/Earphone Tone Arm 14.AUX IN Control Perch 15.USB play/USB encoding LED Indicator Light 16.DC IN port Volume Knob & Power ON/OFF 17.Tone Arm Lock AUTO-STOP Switch 18.Turntable Pickup Speed Control Switch 19.Vinyl Tray 9.
  • Page 4: Preparation For Use

    PREPARATION FOR USE Carefully unpack the Main unit from its carton (do not attempt to connect anything at this stage). You should have the following items: Packing included 1. Manual Book 2. Main Unit 3. Charging Cable 4. AUX cable 5.
  • Page 5 6.Push the arm lift lever up to raise the arm, now platter will still running but play will pause. To continue the play, user just need to put down the lever. 7. Turn the Volume Knob for volume adjustment. Encoding Operation 1.
  • Page 6: Bluetooth Function Operation

    3.The LED indicator is blue and quickly flashing. 4. Set your Bluetooth enable device to search for Bluetooth devices. 5. When the Bluetooth enable device finds the turntable, select CCT01 from the list of the found devices. If required, enter the password 0000. Select OK or Yes to pair the two units.
  • Page 7 3.The LED indicator is solid blue under AUX-IN mode. 4. Connect one end of the included AUX Cable to the AUX-IN port on the turntable, and the other end to an external speaker system's input port. 5. Open a media player on your device and click on PLAY to start playing your music.
  • Page 8: Technical Specifications

    TECHNICAL SPECIFICATIONS Power Charging Supply: 5V / 1A Power Consumption: Audio Output Power: 3W x 1 Vinyl Frequency Range: 2970~3080 Frequency Jitter Scope: 30Hz Bluetooth Version: JL 4.2 Bluetooth profiles: A2DP, AVRCP Bluetooth range: Line of sight, 10M or 30FT Lithium Battery Capacity: 1200mAh Unit Size:...
  • Page 9 - Replace all batteries at the same time. Never mix zinc batteries with alkaline batteries or rechargeable batteries - The batteries must be removed from the device - Also, remove the batteries from your device if you do not use it for a long time, if the batteries may leak and cause damage.
  • Page 10 Warning: changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Table of Contents