Philips BT5200/15 Manual page 23

BT5200-15EN_A6_CS6_new.indd 22
Cleaning the trimming head connector
Make sure you clean the trimming head connector
at least once every three months.
1 Switch off the appliance.
2 Pull the comb off the trimming head.
3 Pull the trimming head off the appliance.
4 Clean the trimming head connector and the
hair chamber under the tap with lukewarm
water or clean it with the cleaning brush
supplied.
5 Clean the inside of the trimming head under
the tap or with the cleaning brush supplied.
6 Carefully shake off excess water and let both
parts dry.
7 After cleaning, put the trimming head back
onto the appliance. Make sure the projection
1
on the back of the trimming head fits exactly
2
onto the notch in the hair chamber.
22
ENGLISH
15/05/26 20:43