Motorola Digital StarTAC Instruction Manual page 99

the Name Preference feature. (See "Phone Book
Display Preferences" on page 53.)
<ADD NEW TEXT: NAME IS NOT REQUIRED IN
PHONE BOOK>
If you subscribe to call waiting and receive a call
while another call is in progress, you hear a call
waiting tone and the caller's number appears on the
display. The number will automatically be stored
and can be viewed after ending the call, using the
procedure described on the next page.
If the caller has restricted transmission of the phone
number, your phone will display Private. If the
Calling Number ID information is not available to
the cellular network, your phone will display No ID.
This information will not be in the Caller ID list as
one of the last 20 numbers dialled.
You can store any number contained in your Caller
ID memory to a memory location in the same way
you would save any phone number. Once the
correct number is displayed, press
memory location or
with the Menu" on page 44 for more information on
storing phone numbers.
To Use Caller ID
1. Follow the steps in the "Getting to Phone
Shortcut: 2. Press
‰,
Press then
3. Press
press and hold
‰,
and
continue with
step 2 if you
have
messages.
4. Press
98 Using the Message Center
«
to autoload. See "Storing
Options..." block to scroll to Caller ID. You
will see Caller ID XX No's. ( XX ) is the total
numbers stored.
to enter your Caller ID number list.
to scroll through the list. The
or
display shows the call number in the upper
left corner, with the phone number of the last
phone call displayed as C0, the next to last as
C1, and so on, through C9.
If no numbers are in the caller ID list, you see
Empty.
æ
to dial the displayed number.
¬
and a