Polaroid PDWF-800NT User Manual page 27

Slideshow Settings
• Change the way the frame transitions from one photo to the next.
Choose from: Still photo, Random transition; Fade; Slide from
Right; Slide from Bottom Right; Spin from Center.
• Adjust the amount of time each photo is shown by adjusting the
time on the preview screen, then press Apply to save settings.
• You can also choose to show the date and time on the slideshow.
After selecting the clock icon you can drag the time on the
preview screen to change the position of the date and time on
the display.
Storage Path
Select where photos sent to the frame via Wi-Fi are stored: Choose
from the frame's built-in memory, a USB drive (frame supports up
to 64GB) or SD/MMC/SDHC card (frame supports up to 32GB
SD/SDHC card and up to 1GB MMC card).
Storage Space
• Display the remaining memory in all storage devices. (Note: The
digital photo frame operating system and the sample photos
utilize a portion of the 4GB total internal memory, so available
memory will always be less than 4GB even if all sample photos
are deleted from the frame.)
New Photo Alert
• New Photo Alert will allow you to select how long the "New
Photo" icon is displayed after new photos are received.
Date and Time
• You can select the date and time settings and set the date
and time.
Sleep Settings
• The sleep timer can be set to put the frame to 'sleep' to conserve
energy. You can set multiple times or ranges the display will be
automatically turned on/off.
Display Mode
• Display mode allows you to select how your photos are displayed,
either in the original format/size, or full screen
Note: Due to the original photo resolution and format, some photos
may NOT be able to fill the entire screen. We encourage you to
experiment with the settings as there are many options available.
27