Siemens SIWAMAT XL 528 Instruction Manual page 42

Water connection
Water supply
min. 10 mm
42
All manuals and user guides at all-guides.com
Caution
The washing machine must only be operated with
cold tap water. Do not connect the appliance to the
mixer tap of an unpressurized hot water boiler.
If in any doubt, have the water connection carried out
by an authorized technician.
The water supply hose must not be:
- Bent or squashed.
- Modified or cut through (stability can no longer be
guaranteed).
Plastic threads must only be tightened by hand. Do
not remove the strainer from the water supply hose.
Observe the water pressure in the supply network:
- The water pressure should be between 1 and
10 bars (when the tap is turned on, at least 8 litres
of water is discharged per minute).
- A pressure reducing valve must be installed if the
maximum water pressure is exceeded.
Connect the water supply hose:
q To the back of the washing machine, and...
q To the water tap.
q After connection:
Turn on the water tap completely and check that
the connection points are water tight.