Advertisement
Step 3 – Plug the adaptor into power outlet. The battery
level icon will flash while charging and stop flashing when
fully charged. A full charge will take approximately 3
hours.
DO NOT MIX RECHARGEABLE AND STANDARD BATTERIES
DO NOT ATTEMPT TO CHARGE STANDARD ALKALINE
BATTERIES.
CHARGE THE BATTERIES INDOORS ONLY AND BETWEEN 0°C
AND 40°C.
To extend battery life, charge unit at least every three
months, if reader is unused.
READING PIT TAGS
When scanning for PIT tags PRESS AND HOLD BUTTON
DOWN during procedure. The reader will display
"SEARCHING".
Test reader by placing test chip provided on key chain. If
PIT tag number is not detected, consult USER MANUAL.
Do not attach key chain to reader.
If a PIT tag is detected, the number will appear on the
display. If a PIT tag is not detected it will display "NO ID
FOUND".
Keep the scanner as close to the animal or item as
possible and move slowly over standard locations for the
particular species.
Note 1 – PIT tag placement may vary per animal.
Advertisement
