Software Installation - AIPTEK HyperPen 4000 Series User Manual

BACKUP
Before starting the software installation procedure, please make a backup
copy of the original diskette and use this copy to install, storing the
original in a safe place..
Driver Installation
1. HyperPen is fully Plug-n-Play compliant and should therefore be
detected by Windows 95 as "New Hardware Found" when you start up
your machine. If for any reason it is not, please go to the Windows
Control Panel and double-click on the "Add New Hardware" icon.
When Windows asks if it should auto-detect new hardware, select
"No" and proceed to the next screen. Then choose "Tablet" or "Other
Devices" from the list of installable devices and click on the "Next"
button.
2. Select "Have Disk" and, after inserting the HyperPen driver diskette
into the selected drive bay, click "Next."
3. Select the model name in the "Select Device" dialog box, then press
"Enter" on the keyboard to install drivers to your system.
4. Restart your computer to enable the new drivers.
HyperPen Manager installation
Every HyperPen tablet and stylus has been fine-tuned and pre-optimized
at the factory prior to shipping. However, this utility allows you to make

Software Installation