Related Manuals for EHUOYAN ER302
Summary of Contents for EHUOYAN ER302
- Page 1 ER302 User Manual ER302 Manual Ordering Information Model No. ER302 Name NFC Writer Phone 86-010-59870151, 59754725 Email info@ehuoyan.com http://www.ehuoyan.com/ Version 1.1.0 Page 1 of 13 Nov 2014...
- Page 2 ER302 use USB port to act as a virtual COM port. The proximity operating distance of ER302 is up to 10 cm, depending on the type of contactless tag in use. The ER302 is ideal for secure personal identity verification, access control, e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication.
- Page 3 ER302 User Manual Dimensions 120 mm (L) x 80 mm (W) x 16 mm (H) Weight 100 g (including USB cable) Cable length 1.5m Color white Interface USB (VCP) Baud rate 115200 bps (default) Operating Distance Up to 10 cm (depends on the tag type)
- Page 4 ER302 User Manual Network Login Transportation Loyalty Program 5. How to use Step1: Open the folder “USB_Driver_Windows”, then you will find two installer programs shown as below. If the user’s OS is bits, then click “CP210xVCPInstaller_x86.exe” to windows 32 bits, then click “CP210xVCPInstaller_x64.exe”...
- Page 5 ER302 User Manual Step3: On the next picture, select “I accept this agreement”, next click “next step”. Version 1.1.0 Page 5 of 13 Nov 2014...
- Page 6 Step4: On the next picture, click “Finish”, then the USB driver install fully. Step5: Connect the ER302 to the USB port of PC, shown as below. After power on the RED led will flash one time, then the buzzer will beep one time, at last the blue led will light on, it means that the reader is ready now.
- Page 7 ER302 User Manual send the commands from the host to the ER302. After connect the USB, you can see the Virtual Com Port (VCP) on the “Device Manager”. How to find out which communications port the operating system has assigned to...
- Page 8 ER302 User Manual Note: If the COMX exceed COM10, please change it between 1 to 9, for example, it shows COM12, then you can change it into COM3. HOW TO CHANGE COM PORT NUMBER? If you need to change the port number assigned to your USB driver, proceed to next step to change the USB driver port number in the Device Manager.
- Page 9 ER302 User Manual 2) Open the “Port settings” tab and select “Advenced”. Version 1.1.0 Page 9 of 13 Nov 2014...
- Page 10 ER302 User Manual Step6: Now, you can run the program to send commands to the ER302. You can run the eReader.exe or else App(base on the dll files) to communicate with the ER302. The ER302 will not do anything unless you send command to it. There is only one program can be run and connect to the ER302 at the same time.
- Page 11 ER302 User Manual Note: For the eReader program please reference the eReader manual. 6. Troubleshooting fault solution No sound when power on If the blue led is not light, plug the USB again or plug it into another USB port.
- Page 12 ER302 User Manual Note: Remove the film which covers on the label shown as below on the first time using. -------------------------------------------------------------------------------------------------------------- Contact Information: EHUOYAN Technology Co., Ltd. Tel: +86 -010-59870151 Fax: +86 -010-59754725 Email: info@ehuoyan.com Web Site: www.ehuoyan.com Version 1.1.0...
Need help?
Do you have a question about the ER302 and is the answer not in the manual?
Questions and answers