Tire Clearance - Cervelo S5 Disc User Manual

TIRE CLEARANCE

Your Cervélo bicycle complies with the ISO 4210-2:4.10.2 standard for tire clearance. In order to comply with these safety standards and maintain
your Limited Lifetime Warranty, a minimum of 4mm of clearance must remain between the tire and any frame element. Due to the growing
complexity of tire and rim interfaces, Cervélo recommends identifying the available space before choosing a tire.
4mm
minimum
4mm
minimum
1. Measure the space between the
chainstays at the bottom bracket
junction.
2. Measure the space between the
seatstays at the top of the tire.
3. Using the smallest of those two
numbers, subtract 8mm (4mm per side)
to determine the remaining space.
4. With the tire installed and fully inflated
on your wheel, measure the tire width to
ensure that it fits.
WARNING
Contact between the tire and
the frame or fork may result in a
loss of control while riding and
potentially serious injury. Failure
to follow these guidelines may
result in damage to the frame
not covered by Cervélo Limited
Lifetime Warranty.
34