Kenmore 437.83235 Owner's Manual page 8

Power H ead
REPLACING THE,
(Model #83155)
Step 4
Fastener
._harcoal Pre-filter
HEPAFilter
/
Locking
/ _ Mechanism
Base
;HARCOAL PRE-FILTER
Remove the filter assJ_mbly(consisting of the HEPA filter
and pre-filter) from tl_ power head.
Step 5
Remove the strap fasflener and carefully remove the pre-filter
and discard.
Step 6
Remove any plastic _rotective wrapping from the new pre-
filter prior to insertioi) into the HEPA air cleaner. Carefully
wrap the new pre4ilt_r around the HEPA filter and secure
into place with the s_rap fastener, Proceed to step #!0.
CHANGING THE I_EPA FILTER (Model #83154)
Step 7
Follow instructions t_l_'ough Step 6. Remove used HEPAfilter
assembly and discaHd the filter.
Step 8
Remove any protectt_/eplastic wrapping and packaging from
the New HEPA filter
Step 9
H
Replace the pre-filt_r by wrapping it around the HEPA
filter and use the st[_apfastener to secure the pre-filter in
place. Please be suJlethat the pre-filter has been properly
installed and is layiltg flat around the HEPA filter.
Step 10
Place the filter ass_nbly into the power head and instali
the base,
Note: The HEPA fil_er assembly was designed to easily fit
into the power hea_ without any orientation: there is no
top or bottom to th_ HEPA filter,