Connecting Your Mirra To A Power Source - Seagate Server User Manual

the provided Ethernet cable to connect your Personal Server to the router as
shown in Figure 2~2:
Your configuration might look different than the one pictured in Figure 2~2.
Connect your Personal Server to your router in the same way you connect other
computers.

Connecting your Mirra to a Power Source

To connect your Mirra to a power source,
Step 1:
Mirra Manual for Windows
Figure 2~2 Connecting your Personal Server with Multiple Computers
Plug the appropriate end of the provided power cable into the power slot on
the rear of your Personal Server. Make sure it's firmly and completely
seated.
Figure 2~3 Mirra Power Plug Outlet
Release 2.2 5