Page 1
Date: November 2011 c 2011 STREAMIT BV — All rights reserved THE MATERIAL CONTAINED HEREIN IS COPYRIGHTED AND PROTECTED UNDER NATIONAL AND INTERNATIONAL COPYRIGHT LAWS AS AN UNPUBLISHED WORK AND UNAUTHORIZED REPRODUCTION OR MODIFICATION IS PROHIBITED WITHOUT WITHOUT THE EXPRESS PRIOR...
With the help of this manual and the right equipment you are able to install and configure the Lukas Video yourself, provided that you have some PC and internet knowledge. The operation of the Lukas Video is very easy, using only the remote control that is included. Introduction In this user manual the following symbols will be used for important instructions.
In case you cannot get it to work, we would like to ask you to contact the person from whom you bought or received the Lukas Video. Streamit only supports (through telephone or email) customers who bought the Lukas Video directly from Streamit. In addition we deliver free support via the support page on our website http://www.streamit.eu/support/.
Connecting the Lukas Video to the TV set To connect the Lukas Video to the TV set you can choose between an HDMI or a Composite/RCA audio-video connection. If your TV set has both options, HDMI is recommended for better image quality.
When a different platform is used, follow the corresponding instructions for that platform. To register the Lukas Video at the Streamit AVplatform take the following steps: Note the MAC address of the Lukas Video. Thisi is printed on the bottom of the Lukas Video and starts with 24:cf:.
Adjust the settings of the Lukas Video Some settings can be adjusted via the menu of the Lukas Video. In most cases the factory default values work just fine, but using the ‘MENU’ button on the remote control brings you in a menu where you can inspect and adjust a number of things if necessary.
Conclude by navigating to the on-screen ‘OK’ button and pressing ‘OK’ on the remote control The Lukas Video now makes connection to the chosen wireless network The icon next to the description of the wireless network indicates if the Lukas Video is connected (green symbol) or not (red symbol).
‘OK’ button and pressing ‘OK’ on the remote control. Inspect device details If the sticker with the MAC address is not visible on the Lukas Video anymore, you can find this address here. The other device details are generally only relevant for troubleshooting. Streamit support staff...
Gebruikshandleiding - Nederlands Voorwoord Wij danken u hartelijk voor uw aanschaf van de Streamit Lukas Video. De Lukas Video is een audio-video ontvanger waarmee u eenvoudig video en audio ontvangt over internet. Via het Streamit AVportal is de Lukas Video eenvoudig in te stellen waarna met letterlijk een druk op de knop de instellingen door de ontvanger overgenomen worden en de videostream omgezet wordt naar een analoog audio- en videosignaal (RCA/Composiet of HDMI).
Streamit BV, Verdunplein 10, 5627 SZ Eindhoven, Nederland. Als u er niet uitkomt Wij kunnen ons voorstellen dat het installeren van de Lukas Video voor mensen met een beperkte kennis van computers en software lastig kan zijn, maar dit hoeft niet.
Fig. 6: Achteraanzicht van de Lukas Video Aansluiten van de Lukas Video op het televisietoestel Voor het aansluiten van de Lukas Video op het televisietoestel kunt u kiezen uit een HDMI of een Composiet/RCA audio-video aansluiting. Als uw TV-toestel beide mogelijkheden heeft, geeft HDMI de beste beeld-kwaliteit.
Het aanmelden van de Lukas Video voor het Streamit AVplatform gaat als volgt: Noteer het MAC-adres van de Lukas Video. Deze is op de onderzijde vermeld en begint met 24:cf:. Log in op http://av.streamit.eu. Als u nog geen account hebt, moet u zich eerst inschrijven.
De instellingen van de Lukas Video aanpassen Het is mogelijk om via het menu op de Lukas Video een aantal instellingen aan te passen. In de meeste gevallen werken de standaard instellingen prima, maar via de knop ‘MENU’ op de afstandsbediening komt u in een menu terecht waar u een aantal dingen kunt inspecteren en eventueel aanpassen.
Verbinding maken met een draadloos netwerk (Wifi) Om de Lukas Video te verbinden met een draadloos netwerk (Wifi), heeft u een USB Wifi dongle nodig die u achterin de Lukas Video steekt. Volg daarna onderstaande stappen om verbinding te maken: Ga via de knop ‘MENU’...
‘OK’ te gaan en op ‘OK’ te klikken op de afstandsbediening. Apparaatgegevens bekijken Mocht de sticker met het MAC-adres niet meer op de Lukas Video zitten, dan kunt u dit adres hier vinden. Verder zijn de gegevens in dit scherm eigenlijk alleen van belang bij het oplossen van storingen.
Need help?
Do you have a question about the Lukas Video and is the answer not in the manual?
Questions and answers