Installation; Fasten The Unit; Electrical Wiring; Power Up - Rainmachine Pro-16 Quick Start Manuals

Installation

Tip: Take a photo of your old timer wiring for reference!
1. Fasten the unit
Using the provided drywall screws, fasten the unit to the wall at 4 to 5
feet high or eye level.
2. Electrical Wiring
Insert your valve wires into the corresponding terminal.
You can use any or all of the "C" terminals as common terminal.
3. Power Up
Connect the power leads to the terminals marked "24VAC" and plug
transformer into an AC wall socket.
The system will boot up and will enter in the initial setup mode.
4 RainMachine Pro-16 Quick Start Guide