Operations
Creating Your First Program
In order to enable automatic watering, you need to setup at least one
program:
1. From the RainMachine app, go to Programs > Add New Program
2. Label your program such as "Rose Garden".
3. Select a Frequency: Determines how often the program runs.
4. Set Start Time.
5. Choose a base watering duration for each zone (Suggested or
Custom).
6. Save.
Note: Suggested duration is the amount of watering required for each zone, during a
regular summer day based on the zone advanced settings. The RainMachine will
constantly adjust this suggested duration based on weather and celestial conditions
(temperature, rain, humidity, wind, etc. and number of daylight hours). See next page
for details.
10
RainMachine Pro-16 Quick Start Guide