it ITSBL-509 Manual page 6

BE SURE TO READ AND KEEP THIS INSTRUCTIONS
CARE AND OPERATION:
The lamp speaker is designed to operate in an average room temperature of 22-25℃,
make sure the lamp speaker is at room temperature before starting. Always operate the
unit on a firm, flat and stationary surface. Do not operate the lamp speaker on any warm
or hot surfaces.
CAUTION:
●The lamp speaker should never be operated for more than 24 hours at a time. If
operated for more than 24 hours, the base can get deformed from heat.
●Do not add any fluid or solids to your lamp. The air space at the top of the lamp speaker
has been provided to allow for expansion.
●Do not place the lamp speaker near sources of heat or cold such as heat and air
conditioning vents. Always operate the lamp speaker only at room temperature. Operation
or storage of lamp speaker in direct sunlight will cause colors to fade.
●The lamp speaker operates at a very high temperature and the vessel is made of glass.
Operate out of the reach of the children and pets.
CAUTION:
●Do not operate the lamp speaker with any other bulb except for the one provided by this
manufacturer's customer service.
●Do not leave the lamp speaker unattended. Do not run the lamp speaker while sleeping,
as this is novelty item and it is not intended to be used as night light.
●Do not replace with unauthorized bulb in this lamp speaker.
●The lamp and speaker base will be hot while in use and after the unit has been turned
off/unplugged. Do not touch the lamp speaker or the bulb while it is on.
●Keep it out of the reach of the children and pets.
●While lamp speaker is in operation, be sure not to move or shake it in order to avoid
permanently damaging the lamp speaker. The lamp speaker should never be heated by
any other means, nor should it be cooled artificially. Do not use when the glass is cracked
or damaged.
●The space on the top of the lamp speaker is provided for expansion. Do not break the
seal of the cap to fill it with liquid or solid. Breaking the seal will void your warranty and ruin
the product.
●If the external flexible cable or cord of the base is damaged, do not attempt to replace it
yourself. It should be replaced by the manufacturer, service agent or a similar qualified
person in order to avoid a hazard.
6