HigH PReSSuRe WaSHeR COMPONeNT LiST ON/OFF SWiTCH OuTLeT WiTH PROTeCTiON CaP eLeCTRiC CabLe HOLdeR FOR eLeCTRiC CabLe SaFeTY LOCK SPRaY guN HigH PReSSuRe HOSe adjuSTabLe SPRaY LaNCe SPRaY guN HOLdeR LaNCe HOLdeR FeNCe NOzzLe CLeaNiNg TOOL WHeeLS iNLeT WiTH QuiCK CONNeCTOR HaNdLe TRiggeR SWiTCH CONNeCTiON LaNCe...
Page 6
HigH PReSSuRe WaSHeR or instruction concerning use of the appliance by a WARNING Do not use machine if a supply cord or person responsible for their safety. important parts of the machine are damaged, e.g. - Children should be supervised to ensure that they do safety devices, high pressure hoses, trigger gun.
HigH PReSSuRe WaSHeR TeCHNiCaL daTa 2. MOuNTiNg OF HOLdeR FOR eLeCTRiC CabLe Press the holder for electric cable (4) on to the machine. (See Fig. B) Rated voltage 220-240V ~ 50Hz Rated input power 1400W 3. MOuNTiNg OF WHeeLS Rated working pressure 7MPa (1015PSI) Mount the wheels (12) by pressing them into the Max.
HigH PReSSuRe WaSHeR 3) Before operate high pressure washer, press the 3. Stop the machine, unplug and wind up hose and trigger switch (15) to bleed any trapped air out of cable. the pump and hose. (See Fig. K) 4. Place spray handle, nozzles and other accessories 4) Start the pressure washer by turning ON/OFF in the holders of the machine.
HigH PReSSuRe WaSHeR which is too high. This is why cleaning is required immediately. 1. Stop the machine and disconnect the nozzle. 2. Clean the nozzle. iMPORTaNT: The cleaning tool (11) should only be used when the nozzle is detached! (See Fig. N) 3.
Page 10
HigH PReSSuRe WaSHeR Machine often starts and Pump/spray gun is leaking . Contact your nearest Service stops by itself Pump/hoses or accessory frozen Wait for pump/hoses or accessory to thaw. Machine starts, but no No water supply Connect water supply and turn on. water comes out Water filter blocked Clean the filter...