User Interface; Select System Type - Slant/Fin SC-3 Installation And Operating Instructions Manual

Modular boiler controller for gas-fired, oil fired and dual fuel hot water heating plants
Table of Contents

Advertisement

11

User Interface

The control uses a Liquid Crystal Display (LCD) as the method of supplying information. You use the LCD in order to setup and monitor the
operation of your system. The control has four push buttons (Menu, Item, s,t ) for selecting and adjusting settings. As you program your con-
trol, record your settings in the ADJUST menu table which is found in the second half of this brochure.
Menu
All of the items displayed by the control are organized into two menus.
These menus are listed on the top left hand side of the display (Menu
Field). To select a menu, use the Menu button. By pressing and releasing
the Menu button, the display switches between the two menus. Once a menu
is selected, there will be a group of items that can be viewed within the menu.
Item
The abbreviated name of the selected item will be displayed in the item field
of the display. To view the next available item, press and release the Item
button. Once you have reached the last available item in a menu, pressing and
releasing the Item button will return the display to the first item in the selected
menu.
Adjust
To make an adjustment to a setting in the control, begin by selecting the
ADJUST menu using the Menu button. Then select the desired item using the
Item button. Finally, use the s, and / or t button to make the adjustment.
Additional information can be gained by observing the Status field of the LCD. The status field will indicate which of the control's
outputs are currently active. Most symbols in the status field are only visible when the VIEW menu is selected.

SELECT SYSTEM TYPE:

A. Space Heating ONLY with Outdoor Reset (Most systems) . . . . . . . . . . . . . . . . . . . . . . Page 12
B. Space Heating ONLY with Setpoint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
To set up the control, go to the appropriate page for your system.
If your system is different than the above, call the Slant/Fin technical services
group at 800-873-4346 to determine which control can accommodate it.
SC-3 Controller

Advertisement

Table of Contents
loading

Table of Contents