Getting Started; Unpacking Your Device; Charging Your Device For The First Time - TRACKIMO Universal Tracker User Manual

1. Getting Started

1.1.

Unpacking Your Device

Carefully unpack your Trackimo device. Your packaging should include:
• Battery
• Locking Belt Clip
• Adhesive Velcro
• Adhesive Magnet
• Water Resistant Sleeve
• USB Cable
• Screw Driver
• Keychain and Lanyard
A Quick Start Guide and a Safety & Warranty page are also included.
• Use only approved accessories.
• Accessories may vary by country or region.
1.2.

Charging Your Device for the First Time

Your battery will not be installed or charged when you first unpack your device.
Install the battery by taking off the back cover and inserting the battery. To take
off the back cover, gently push it in the middle and slide it off.
To charge, connect one end of the data cable to the charger port at the bottom of
the device, and the other end to a power USB adaptor.
Then connect the USB adapter to a power outlet. Charge the device for 12
hours.
2
User Guide v7