Kygo B9 800 Quick Setup Manual

Safety
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
QUICK SETUP GUIDE
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, outlets,
and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way. Examples of service-requiring damages include
power supply cord or plug damage, liquids has been spilled or objects falling onto the
apparatus, apparatus not operating normally, and/or apparatus being dropped.
Do not install this equipment in a confined space, such as a book case or similar unit,
and make sure that it is well ventilated. The ventilation should not be impeded by
covering the ventilation openings with items, such as newspaper, table-cloths, or curtains.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and objects filled with liquids,
such as vases, shall not be placed on apparatus.
WARNING:
The power adapter is used as a disconnect device. The disconnect device shall remain
readily operable.
The equipment shall be used at a maximum of 95
WARNING:
Please refer to the information on the exterior bottom enclosure for electrical and safety
information before installing or operating the apparatus.
Guarantee
Maintenance
Cleaning the Unit
visit www.
kygolife.com
Oslo,Norway
Email:webshop@kygolife.com
Org.nr NO 916594844
Quick Setup Guide
AUX IN
AUX IN
CHARGE IN
Function
1. Press about 2s to power on, press again to power down.
Power 2. If power on, the WiFi mode set up. After WiFi setup finished, if no
ON/OFF
VOL+ Press to turn up the volume, holding to keep going up.
VOL- Press to turn down the volume, holding on to keep going down.
1. Press the button once: if the speaker is playing then pause, if the
2. Short press about 2s: enter Bluetooth pairing mode, if Bluetooth
Bluetooth
3. Long press>5s: disconnect all Bluetooth connections and enter to
4. Automatic reconnect last device in pairing mode.
5. Keep connection in standby mode with 30mins, press Play button
6. In standby mode, after 30min, will disconnect Bluetooth connection.
Mic Mute Press button for Mic mute on and off.
Short press it will be connected to live streams from Kygo concert or
Kygo Button
festivals and so on.
Google Install Google Home app into phone, follow instruction of application
Cast Stream for wifi setup and music streaming process.
Factory When the speaker power on, hold the vol- & vol+ at the same time for
Default 15s, the speaker will power off by itself and reset factory default
Resetting settings.
(35 ) ambient temperature.
WiFi streaming: Once detect signal from Google cast, auto switch to
WiFi mode to play music. In standby mode, still can detect signal and
wake up to stream music.
Source
Bluetooth: In Bluetooth mode, once unit be paired with device, can
change
play music, if WiFi is playing music, stop or pause WiFi playing first.
Aux IN: In AUX IN connection, Bluetooth is disabled; if you wake up
with "OK, Google", then change to WiFi mode.
Troubleshooting
If you have problems using this product, check the following
points before you request service, never try to repair the product yourself.
If you still have any problems, get support at www.kygolife.com/support.
PROBLEM
No Power
No sound in Bluetooth
Cannot establish
Bluetooth connection
with this product
Cannot connect to Wi-Fi
Features
Bluetooth 4.2
Power on/off
8 hours playing time
Four RGBs
Google Assistant built-in
Mic
CHARGE IN
Bluetooth
Mic mute LED indicator for low battery
LED Indicator
Compatible with Kygo Sound App
Mic
Kygo Button
Multiroom playback across
speaker with built in chromecast
Google Voice Assistant
Description
Just start with "OK Google", then ask it questions or tell it to do things like this:
"Play some jazz"
any action in 30mins,unit will enter to standby mode, but unit must
keep listening for hotword if micphone is not muted. "Turn up the volume"
"Set a 13 minute timer for pizza"
"Do I need an umbrella today?"
Google Chromecast Built-in
speaker is paused then continue playing; If in Bluetooth pairing
mode and no connection to any device, then exit pairing mode Follow the three steps below to enjoy this feature:
(in this state with no action, then auto exit pairing mode 10 mins
later). 1. Connect a phone or tablet to the same Wi-Fi network as your speaker using the
Google Home App.
connected, then disconnected current connection and go to new
Bluetooth pairing. 2 .Cast podcasts, music, and more from 100+ Chromecast-enabled apps.
Tap the Cast button in a Chromecast-enabled app to play
pairing mode.
3 .Tap the Cast button in a Chromecast-enabled app to play music on your speaker.
on Phone can wake up and streaming.
Establish Bluetooth connection
The speaker is equipped with Bluetooth to allow wireless playback from any
Bluetooth-enabled phone or tablet.
1. If power on, Short press the button about 2s then enter Bluetooth pairing mode,
blue led indicator fast flash.
2. click the device name you entered during Google Home App setup on your device
to pair with the speaker.
3. After the speaker and your device are paired, you can stream music from your
device to the speaker.
Specification
SOLUTION
Make sure that your speaker is plugged in and
turned on.
1. Make sure that your Bluetooth device is turned
on, Bluetooth is turned on, and the device name
you entered during Google Home App setup is
selected.
2. Turn up the volume on your speaker.
3. Turn up the volume on your Bluetooth device.
4. Make sure that your Bluetooth device is not
muted.
5. Make sure that your speaker is paired to the
correct Bluetooth device.
1. Shorten the distance between your speaker and
your Bluetooth device.
2. Make sure that your speaker and Bluetooth
Function
device are both in pairing mode.
3. Make sure that your Bluetooth device is not
connected to any other device.
System Boost up
4. Make sure that your speaker is not paired to any
other Bluetooth device.
5. Make sure that your Bluetooth device supports
Bluetooth v4.2.
6.Make sure that you have selected B9/800 when
you entered during Google Home App setup.
7. Turn your devices off, then on. Re-pair your Reach Max Volume
speaker and your Bluetooth device.
Bluetooth
1. Make sure that the wireless network is not
disturbed by microwave ovens, DECT phones,
or other neighboring Wi-Fi devices.
Aux-in
2. Make sure that the speaker and your device shar
the same network. Mic Mute
3. Make sure that your router/modem is on and that
you are within range of it. Factory Default
Resetting
Chromecast built-in
2,4/5 GHz Wifi support
360 degree sound profile
Great Sound quality with AAC®
IPX 7 - Waterproof and flotable
LED indicators
4RGB LEDs show white color slow breathing
1.Red LED fast flash (Battery power is less than 20%)
2.Red LED slow breathing (Solid Red when 100%
charged)
4 RGB all show white fast flash for two times
1.Blue LED fast flash (Pairing mode)
2.Solid blue(Connected)
3.Blue LED off(Disconnect)
Solid Green
Micphone off: 4 RGB Orange
4RGB LEDs show white constant with fade in 0.5s