Advertisement
Quick Links
INSTRUCTION MANUAL
Elite 5' Tower
Elite 5' Tower
Extension Kit
Model BBT500
Model BBT510
Please see extra packet contents for registration warranty
form and additional important information.
ATTENTION!!
WHEN YOU SEE A " WARNING!" BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES
CAN SAVE YOUR LIFE!!
PLEASE NOTE THAT
WARNING!
statements have been placed throughout this Instruction Manual. These
statements point out important safety information and instructions, which, if not followed could endanger the
personal safety and/or property of the operator. It is imperative that the operator of this product, or any other
product(s) read and follow all the instructions and warnings contained in this Manual prior to attempting to use
this product(s), or any other product(s). Failure to comply with these instructions and/or warnings may result in
serious personal injury or death!
PO Box 454 • Windom, MN 56101 • (844) 745-7723
www.GoMuddy.com
This instruction manual complies with the ASTM standard F2123 - Standard Practice for Treestand Instructions.
January 2018. Published by Premier Outdoor Equipment, LLC, Windom, Minnesota.
© 2018 Premier Outdoor Equipment, LLC All rights reserved.
Advertisement
Related Manuals for Muddy BBT500
Summary of Contents for Muddy BBT500
- Page 1 INSTRUCTION MANUAL Elite 5' Tower Elite 5' Tower Extension Kit Model BBT500 Model BBT510 Please see extra packet contents for registration warranty form and additional important information. ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
- Page 2 (15) pounds (7 kg) of weight on this structure. Doing so will put the user in of this product, or any other Muddy® product(s) do not hesitate to call one serious risk of injury or death. Failure to follow these instructions may result...
- Page 3 You must read and follow all the manufacturer’s instructions the freestanding platform treestand in any way. Additionally, do not for the safe use and operation of any heating device(s) used in this Muddy® attach anything to your freestanding platform treestand without explicit product.
-
Page 4: Tools Required
ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! PARTS LIST - BBT500 ELITE 5' TOWER HARDWARE LIST - BBT500 continued Part # Description Part #... - Page 5 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! PARTS LIST - BBT510 ELITE 5' TOWER EXTENSION KIT Part # Description Part # Description UP15-0272 Bottom Leg UP15-0275 Cross Brace Left Horizontal Brace...
- Page 6 WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! The following steps are used to assemble BBT500 Elite 5’ Tower with BBT510 Elite 5’ Tower Extension Kit. Continue to Page 14 for BBT500 Elite 5’ Tower WARNING! Read USAGE INSTRUCTIONS &...
- Page 7 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! FIG. 3 STEP 4. Next, attach the bottom legs to the top legs using (8) 3/8’’ x 1 1/4’’ [A] hex bolts, (16) 3/8’’ steel washers, (8) 3/8’’...
- Page 8 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! FIG. 4 STEP 6. With the flat side of the angle facing to the top, attach the upper horizontal braces to the outside of the bottom/top Legs using (8) 3/8’’...
- Page 9 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! FIG. 5 STEP 7. Connect the left and right horizontal braces to make the lower horizontal braces using (8) 1/4’’ x 1’’ [F] hex bolts, (16) 1/4’’...
- Page 10 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! FIG. 6 STEP 8. With the flat side of the angle facing to the ground, attach the round hole end of (4) cross braces to the inside of the top legs using (4) 3/8’’...
- Page 11 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! STEP 9. Using the assembled hardware from STEP 7 secure the round hole end of the remaining cross braces to the inside FIG.
- Page 12 Section Rail STEP 12. At this time erect your Muddy tower kit at the desired location, ensuring that it is level and stable. NOTE: Leveling of the tower Ladder kit may require removal of dirt below one or more of the leg supports.
- Page 13 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! FIG. 9 STEP 15. Finally, insert the complete ladder into the notches on the platform base, ensuring the ladder connectors are flush to the surface of the platform base.
- Page 14 THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! The following steps are used to assemble BBT500 Elite 5' Tower. WARNING! Read USAGE INSTRUCTIONS & WARNINGS on pages 2-3 prior to assembly of this product! Failure to follow the instructions on this page and pages 2-3 may result in serious injury or death! WARNING! DO NOT over tighten the hardware.
-
Page 15: Leg Support
ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! FIG. 3 STEP 4. Connect the leg supports to the top legs using (8) 3/8’’ x 1 1/4’’ [A] hex bolts, (16) 3/8’’... - Page 16 STEP 8. SECURELY TIGHTEN EVERY NUT AND BOLT AT THIS TIME. STEP 9. At this time erect your Muddy tower kit at the desired location, ensuring that it is level and stable. NOTE: Leveling of the tower kit may require removal of dirt below one or more of the leg supports.
- Page 17 Ladder Connector ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! Ladder Section STEP 11. Assemble the ladder by connecting the ladder section, ladder connectors, ladder supports and ladder rail using (5) Ladder 3/8’’...
- Page 18 Tie Down Anchor Instructions for Muddy Elite Towers BBT500 Elite 5’ Tower & BBT510 Elite 5’ Tower Extension Kit WARNING! Never attempt to hunt from an unleveled stand. If you find that your stand is unlevel, canted, angled, unstable, or in any configuration other than level, immediately discontinue all use of this product.
- Page 19 ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE! THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!! STEP 8: Connect the wire rope to the tie down hook on the bottom side of the platform base. (A ladder may be required to perform this step.) Run the wire rope through the hook and secure with (2) wire rope clips.
- Page 20 PO Box 454 • Windom, MN 56101 (844) 745-7723 www.GoMuddy.com...
Need help?
Do you have a question about the BBT500 and is the answer not in the manual?
Questions and answers
When attaching the box blind to the platform does the carriage bolt come thru from inside the blind with nut and lock washer on underside I’d tower base? Where does large flat washer go? The carriage bolt has a square that will not let washer to be on floor side. Is there something metal in wooden floor that bolt square sets in?
When installing the Muddy BBT500 box blind to the platform, secure the blind using (4) 3/8" x 5 1/4" carriage bolts. Each carriage bolt goes through the blind and platform base, and is secured with a 3/8" x 1 1/2" steel washer (the large flat washer), a 3/8" lock washer, and a 3/8" hex nut. The large flat washer should be placed between the lock washer and the nut.
This answer is automatically generated