Page 2
MSB100 Ultra-Steady Bench WARNING: Do not use without STEP 1. Using (3) 1/4'’ x 1 1/2'’ hex bolts [A], (6) nylon washers and (3) 1/4'’ nylock nuts securing rear brace to the rear leg using attach the front leg-lower piece to the front leg-upper piece. Then, attach the assembled provided delta bolt.
Page 3
STEP 5. Next, attach the seat cushion to the seat support using STEP 6. Attach the shooting platform to the platform support (3) 1/4” x 2” hex bolts [B] and (3) nylon washers. Then, connect the (4) 1/4'’ x 1 1/2'’ hex bolts [A] and (4) nylon washers to secure. seat support to the rear leg using (1) 5/16”...
Need help?
Do you have a question about the MSB100 and is the answer not in the manual?
Questions and answers