1. Manuals
  2. Brands
  3. Hillstone Manuals
  4. Control Unit
  5. SG-6000 X-Series
  6. Reference manual

Hillstone SG-6000 X-Series Reference Manual

Expansion modules
Hide thumbs Also See for SG-6000 X-Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Reference Manual
Hillstone StoneOS User Manual
Hillstone SG-6000 X-Series
Expansion Modules Reference Guide
www.hillstonenet.com
TW-MDL-XS-EN-V2.0-Y18M06

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SG-6000 X-Series and is the answer not in the manual?

Questions and answers

Related Manuals for Hillstone SG-6000 X-Series

Summary of Contents for Hillstone SG-6000 X-Series

  • Page 1 Hillstone StoneOS User Manual Hillstone SG-6000 X-Series Expansion Modules Reference Guide www.hillstonenet.com TW-MDL-XS-EN-V2.0-Y18M06...
  • Page 2 Hillstone SG-6000 X-Series Expansion Modules Reference Guide Name and Concentration of Toxic or Hazardous Substances and Elements in Products Toxic or hazardous substances and elements Component Lead Mercury Cadmium Cr6+ PDBE Metal parts Χ (including fasteners) Printed circuit board assemblies and Χ...
  • Page 3 About This Manual Thank you for choosing the network product from Hillstone Networks Inc. This document is an installation manual for you to use expansion modules of Hillstone data center firewall. This manual includes the following chapters:  Chapter 1 Introduction ...

  • Page 4: Table Of Contents

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Table of Contents Chapter 1 Introduction....................1 Overview ........................1 System Control Module (SCM) ..................2 Security Service Module (SSM) ..................3 QoS Service Module (QSM) ................... 5 I/O Module (IOM) ......................7 SWM ........................
  • Page 5 Hillstone SG-6000 X-Series Expansion Modules Reference Guide List of Figures Figure 1-1: SCM-300 ....................2 Figure 1-2: SCM-100/SCM-20 .................. 3 Figure 1-3: SSM-300 ....................4 Figure 1-4: SSM-200 ....................4 Figure 1-5: SSM-100 ....................4 Figure 1-6: QSM-300 ....................6 Figure 1-7: QSM-200 ....................
  • Page 6 Hillstone SG-6000 X-Series Expansion Modules Reference Guide List of Tables Table 1-1: Expansion Module Types and Description ........... 1 Table 1-2: SCM Specifications ................. 3 Table 1-3: SSM Specifications ................. 5 Table 1-4: QSM Specification ................... 7 Table 1-5: IOM Specifications ................11 Table 1-6: SCM Specifications ................

  • Page 7: Chapter 1 Introduction

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Chapter 1 Introduction Overview Hillstone data center firewall applies modular design to accommodate various types of expansion module, including System Control Module (SCM), Security Service Module (SSM), QoS Service Module (QSM), Input and Output module (IOM) and Switch Module (SWM, only SG-6000-X10800 supports).

  • Page 8: System Control Module (Scm)

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide (IOM) ports IOM-16SFP- 16 SFP ports IOM-4XFP-100 4 XFP ports IOM-2Q8SFP+ 2 QSFP+ ports and 8 SFP+ -200 ports IOM-2Q8SFP+ IOM-8SFP+ 8 SFP+ ports Optical ports of LC-type IOM-2SM-BE (compatible with SFP/XFP (single-mode)

  • Page 9: Security Service Module (Ssm)

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 1-2: SCM-100/SCM-20 Table 1-2: SCM Specifications Name Description Specification 440mm 215mm (doesn’t WxDxH include the depth of lever) x 45mm Weight 3.45kg 1 Console port (CON port) 1 Auxiliary port (AUX port) Port 1 USB 2.0 Host port...

  • Page 10: Figure 1-3: Ssm-300

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide The device should have at least one SSM installed. You can install more SSMs to escalate system performance. SSMs should be installed in the general expansion slots. SSM module consists of three models: SSM-300, SSM-200 and SSM-100. SG-6000- X10800 uses the SSM model of SSM-300, SG-6000-X7180 uses the SSM model of SSM-200 and SSM-100.

  • Page 11: Qos Service Module (Qsm)

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Table 1-3: SSM Specifications Name Description Specification 390mm 415mm (doesn’t WxDxH include the depth of lever) x 35mm Weight 5.70kg SSM-300 Port None Flash Memory 128GB 1 PWR LED indicator LED Indicator 1 STA LED indicator...

  • Page 12: Figure 1-6: Qsm-300

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 1-6: QSM-300 Figure 1-7: QSM-200 Figure 1-8: QSM-100 Chapter 1 Introduction Hillstone...

  • Page 13: I/O Module (Iom)

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Table 1-4: QSM Specification Name Description Specification 390mm 415mm(doesn’t WxDxH include the depth of lever) x 35mm Weight 5.70kg QoS Service Module (QSM) Port None Flash Memory 128GB 1 PWR LED indicator LED Indicator...

  • Page 14: Figure 1-10: Iom-16Sfp-100

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 1-9: IOM-P40-300  IOM-16SFP-100: The module is applicable for SG-6000-X7180 and supports sixteen SFP ports. Figure 1-10: IOM-16SFP-100  IOM-4XFP-100: The module is applicable for SG-6000-X7180 and supports four XFP ports. Chapter 1 Introduction...

  • Page 15: Figure 1-11: Iom-4Xfp-100

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 1-11: IOM-4XFP-100  IOM-2Q8SFP+ -200 and IOM-2Q8SFP+: The module is applicable for SG-6000- X7180 and supports two QSFP+ ports. Figure 1-12: IOM-2Q8SFP+ -200 Figure 1-13: IOM-2Q8SFP+ Chapter 1 Introduction Hillstone...

  • Page 16: Figure 1-14: Iom-8Sfp

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide  IOM-8SFP+: The module is applicable for SG-6000-X7180 and supports eight SFP+ ports. Figure 1-14: IOM-8SFP+ Chapter 1 Introduction Hillstone...

  • Page 17: Table 1-5: Iom Specifications

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Table 1-5: IOM Specifications Name Description Specification 390mm x 415mm (doesn’t include WxDxH the depth of lever) x 35mm Weight 5.65kg Port 12 SFP+ ports and 2 QSFP+ ports IOM-P40-300 Flash Memory 32GB...

  • Page 18: Swm

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Switch Module (SWM) is a hardware platform card that connects twelve expansion slots of the front panel to forward the data. Only SG-6000-X10800 supports the SWM module. The device must have at least one SWM installed. You can install a second SWM for redundancy.

  • Page 19: Led Indicators

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide  Single-mode bypass module: IOM-2SM-BE  Multi-mode bypass module: IOM-2MM-BE SG-6000-X7180 uses the Bypass model of IOM-2SM-BE and IOM-2MM-BE. You can install bypass module(s) in general expansion slots. For information about connecting cables for bypass module, see Bypassing the Firewall with a Bypass Module.

  • Page 20: Swap Pinhole

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide connection error. The expansion module is working abnormally or is not in the slot. The link between this port and its peer device is in Green/Always on normal status. The link between this port and its peer device has failed.

  • Page 21: Sfp Port

    Caution: To avoid dust falling into the SFP socket, you should place a rubber dust cap (originally in the accessory box) over the SFP port. Hillstone SG-6000-X series supports SFP optical module, but not SFP copper module. If you want the device to connect to an Ethernet copper cable, you need to use a copper SFP transceiver (Copper SFP transceiver of type FCLF-8520-3 from Finisar is recommended).

  • Page 22: Qsfp+ Port

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Table 1-11: XFP Port Attributes Attribute Description Connector Ethernet_II Frame Format Ethernet_SNAP Negotiation Mode XFP optical module 10 Gbps The following types of XFP optical module are supported. The optical modules are available with LC-type connectors and are all hot-swappable.

  • Page 23: Sfp+ Port

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide The following types of QSFP+ optical module are supported. The optical modules are available with LC-type connectors and MPO-type connectors and are all hot-swappable. Table 1-14: QSFP+ Optical Module Attributes Description Short-haul Short-haul...

  • Page 24: Table 1-16: Sfp+ Optical Module Attributes

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Table 1-16: SFP+ Optical Module Attributes Description Short-haul Short-haul Medium- Long-haul Ultra-long Multimode Multimode haul Single- Haul Single- Optical Optical Single- mode mode Attribute Module Module mode Optical Optical (850nm) (850nm) Optical Module...

  • Page 25: Chapter 2 Installing And Removing An Expansion Module

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Chapter 2 Installing and Removing an Expansion Module Overview This chapter describes how to install and remove an expansion module. All expansion modules of SG-6000-X series are hot-removable and hot-insertable. Installing an Expansion Module...

  • Page 26: Installing An Expansion Module Of Sg-6000-X7180

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 2-1: Installing an Expansion Module (SCM as an example) 6. Tighten the screws clockwise. Installing an Expansion Module of SG-6000-X7180 Each module of SG-6000-X7180 has the same installation and replacement procedure. Note that SCM should be installed in the slot SC0 or SC1 of the back panel, and other modules should be installed in the general expansion slots Slot1 to Slot10, but the IOM-2Q8SFP+ and IOM-8SFP+ module cannot be installed in the Slot7 expansion slot.

  • Page 27: Removing An Expansion Module

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 2-2: Installing an Expansion Module (SCM as an example) 6. Tighten the screws clockwise. Note: The tray is installed in each expansion slot at the factory, and you can install the half width modules by taking the above steps. When installing the full width modules (such as SSM-200, QSM-200, IOM-2Q8SFP+ -200, IOM-2Q8SFP+ and IOM-8SFP+), you should remove the tray and install the modules by taking the above steps.

  • Page 28: Removing An Expansion Module Of Sg-6000-X7180

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 2-3: Removing an Expansion Module (SCM as an example) 4. Hold the module with one hand and pull it straight out of the expansion slot along the guide rail. 5. Place the removed module with component side upward into the antistatic bag.

  • Page 29: Figure 2-4: Removing An Expansion Module (Scm As An Example)

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Figure 2-4: Removing an Expansion Module (SCM as an example) 9. Place the removed module with component side upward into the antistatic bag. Note: Apply a blank plate to cover the slot where no expansion module will be installed.

  • Page 30: Chapter 3 Configuring An Expansion Module

    When an IOM is recognized and in its normal working status, you can configure the IOM to utilize the ports on it, like binding a port to a zone, specifying an IP address to a port and configuring policy rules. For more information, see Hillstone WebUI User Guide.

  • Page 31: Viewing Information Of Expansion Module

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Viewing Information of Expansion Module To view the status, serial number and other information of expansion module, use the following commands:  View status: show module [slot-number] View basic information:  show inventory...

  • Page 32: Chapter 4 Troubleshooting

    Hillstone SG-6000 X-Series Expansion Modules Reference Guide Chapter 4 Troubleshooting This chapter provides solutions for some common problems of expansion modules. When an expansion module malfunctions, use the following procedures to troubleshoot:  Make sure the module is in the correct slot and properly installed.

  • Page 33: Copyright Information

    Hillstone, Hillstone Networks logo, StoneOS, StoneManager, Hillstone PnPVPN, UTM Plus are trademarks of Hillstone Networks. All other trademarks or registered marks are the property of their respective owners. Hillstone Networks assumes no responsibility for any inaccuracies in this document. Hillstone Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.

Table of Contents