Advertisement
Quick Links
HEATED GRIP
HEATED GRIP
HEATED
•
This accessory replaces the throttle pipe with a combined heated grip/throttle pipe. Therefore, the
throttle operation has a different feel after installation.
•
This accessory uses a 5 amp fuse. If you ever need to replace this fuse, be sure to use another 5 amp
fuse of the same type.
- Fuse: 5 A
INNER SUPPORT
ER SUPPORT
ER SUPPORT
INNER SUPPORT
INNER SUPPORT
© 2013 Honda Motor Co., Ltd.
MII 14521 (1303)
<RIGHT SHELTER REMOVED>
FUSE
FUSE
bined heated grip/th
•
Check the accessory mounts frequently and
retighten if necessary.
Genuine Accessory User's Guide
BACKREST BRACKET
BACKREST
BACKREST BRACKET
BACKREST
BACK
BACKREST
REAR CARRIER
REAR CARRIER
CTX700N/ND
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
•
The weight of the cargo must not exceed the
following:
MAXIMUM LOAD CAPACITY 6.6 lb (3.0 kg)
879OM-MJF-A000
1 of 3
Advertisement
Related Manuals for Honda CTX700N
Summary of Contents for Honda CTX700N
- Page 1 Finally wipe dry with a soft, clean cloth. • The weight of the cargo must not exceed the following: MAXIMUM LOAD CAPACITY 6.6 lb (3.0 kg) REAR CARRIER © 2013 Honda Motor Co., Ltd. 879OM-MJF-A000 1 of 3 MII 14521 (1303)
- Page 2 CTX700N/ND Genuine Accessory User’s Guide ACCESSORY SOCKET HOW TO INSTALL THE SADDLEBAG <RIGHT SHELTER REMOVED> 1. Release the lock by turning the key clockwise. FUSE 2. Install the left saddlebag as shown. HANDLE LEVER Install the saddlebag with the handle lever raised.
- Page 3 CTX700N/ND Genuine Accessory User’s Guide NARROW SADDLEBAG PANEL MEMO • Check the accessory mounts frequently. • Clean this accessory with a soft cloth soaked with a solution of mild detergent and water. Then wipe with a clean cloth soaked with water to remove any remaining dirt and detergent.