Advertisement
ACCESSORY SOCKET
ACC SOCKET
OCKET
•
This accessory uses a 1 amp fuse. If you ever need to replace this fuse, be sure to use another 1 amp
ory uses a 1 amp fuse. If
fuse of the same type.
ame type.
- Fuse: 1 A
•
Do not connect any accessory that consumes more than 12 watts. (12 V, 1 A).
•
Use accessories with the engine running to avoid discharging the battery.
•
Switching the headlight to low beam when accessories are connected will help avoid discharging the
battery.
•
Never insert a cigarette lighter as this will damage the socket.
•
Cover the socket with the cap when the accessory socket is not used to prevent entry of foreign
objects.
•
Carefully secure any connected devices, as vibrations may cause them to shift unexpectedly.
SADDLEBAG STAY
AG STAY
AG STAY
SADDLEBAG STAY
LEBAG STAY
<RIGHT SHELTER REMOVED>
FUSE
USE
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
Genuine Accessory User's Guide
HOW TO INSTALL THE SADDLEBAG
HANDLE LEVER
Install the saddlebag with
the handle lever raised.
HANDLE LEVER
ANDLE LEVER
LEFT SADDLEBAG
EFT SADDLEBAG
CTX700N/ND
1. Release the lock by turning the key clockwise.
2. Install the left saddlebag as shown.
n.
LOOP
LEFT SADDLEBAG
SADDLEBAG
Insert into the hook.
HOOK
HOOK
3. Lower the handle lever and lock the left
saddlebag by turning the key counterclockwise
as shown.
4. Repeat on the right side.
SADDLEBAG REMOVAL
•
Remove the saddlebags in the reverse
order of installation.
2 of 3
Advertisement
