HEATED GRIP
HEATED GRIP
HEATED
•
This accessory replaces the throttle pipe with a combined heated grip/throttle pipe. Therefore, the
throttle operation has a different feel after installation.
•
This accessory uses a 5 amp fuse. If you ever need to replace this fuse, be sure to use another 5 amp
fuse of the same type.
- Fuse: 5 A
INNER SUPPORT
ER SUPPORT
ER SUPPORT
INNER SUPPORT
INNER SUPPORT
© 2013 Honda Motor Co., Ltd.
MII 14521 (1303)
<RIGHT SHELTER REMOVED>
FUSE
FUSE
bined heated grip/th
•
Check the accessory mounts frequently and
retighten if necessary.
Genuine Accessory User's Guide
BACKREST BRACKET
BACKREST
BACKREST BRACKET
BACKREST
BACK
BACKREST
REAR CARRIER
REAR CARRIER
CTX700N/ND
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
•
Check the accessory mounts frequently and
retighten if necessary.
•
Clean this accessory with a soft cloth soaked with
a solution of mild detergent and water. Then wipe
with a clean cloth soaked with water to remove
any remaining dirt and detergent. Finally wipe dry
with a soft, clean cloth.
•
The weight of the cargo must not exceed the
following:
MAXIMUM LOAD CAPACITY 6.6 lb (3.0 kg)
879OM-MJF-A000
1 of 3