Optional Cable Setting; Input; Code Number Readback; Resetting Your Remote Control - Simplicity RT-SR50 User Manual

9. Optional cable setting

To limit the number of terminal functions your Simplicity remote operates to (0-9, CH / ), Last and Fav,
follow these steps:
1. Press simultaneously CBL Power and MUTE together until the indicator light illuminates.
2. Press 8, 8, 8. Each time you enter a 8, the indicator light will blink red and remain illuminated.
3. When you enter the 3rd digit 8, the indicator light will blink and go out.
To return full functionality to your Cable set-top terminal, follow these steps:
1. Press simultaneously CBL Power and MUTE together until the indicator light illuminates.
2. Press 0, 0, 0. Each time you enter a 0, the indicator light will blink red and remain illuminated.
3. When you enter the 3rd digit 0, the indicator light will blink and go out.

10. Input

The INPUT button changes the input source of your devices. ln the remote's default setting (Cable mode), this button changes
the input source (Input 1, Input 2....) on your TV set.
To program INPUT to operate the input function on your terminal, follow these steps:
1. Press simultaneously INPUT and SEL/OK together until the indicator light illuminates.
2. Press CBL POWER. The indicator light will blink and go out.
To program INPUT to operate the input function on your TV, follow these steps:
1. Press simultaneously INPUT and SEL/OK buttons together until the indicator light illuminates.
2. Press TV POWER. The indicator light will blink and go out.

11. Code number readback

To identify the 4-digit TV setup code stored under the Point and Press method....
1. Press simultaneously TV POWER and SEL/OK together until the indicator light illuminates.
2. Press INFO to identify your TV setup code. The indicator light will «blink back» the code numbers, with a 1-second interval
between each digit of the code.
Example: For code 0035, the indicator light will blink 6 times rapidly, 6 times rapidly, then 3 times slowly, then 5 times slowly.

12. Resetting your remote control

To reset your Simplicity remote control to its default settings, follow these steps:
1. Press simultaneously CBL Power and SEL/OK together until the indicator light illuminates.
2. Press 1. The indicator light will blink and go out.
5
User guide - Simplicity remote RT-SR50