TV learning feature Volume control All power Channel control options Optional cable setting Input Code number readback Resetting your remote control Video on demand Tips and troubleshooting Using your remote control TV setup codes User guide - Simplicity remote RT-SR50...
1. Introduction Your Simplicity remote control is simple to program, easy to use, and can operate two (2) devices, which include: Cable set-top terminals, Televisions. Before you can use your remote control, it must be programmed (set-up) to operate the above devices.
1. Press TV POWER, then RECORD buttons together until the indicator light illuminates. 2. Position the Simplicity remote and your TV remote face-up on a flat surface about 1-2" apart so that their IR transmitters are facing one another. 3. Press TV POWER on your Simplicity remote. The indicator light will blink and remain illuminated.
2. Press 0, 0, 0. Each time you enter a 0, the indicator light will blink red and remain illuminated. 3. When you enter the 3rd digit 0, the indicator light will blink and go out. User guide - Simplicity remote RT-SR50...
9. Optional cable setting To limit the number of terminal functions your Simplicity remote operates to (0-9, CH / ), Last and Fav, follow these steps: 1. Press simultaneously CBL Power and MUTE together until the indicator light illuminates. 2. Press 8, 8, 8. Each time you enter a 8, the indicator light will blink red and remain illuminated.
6. Time Out - If the same button is pressed and held for 30 seconds, your remote control will turn itself off automatically. This extends battery life should the remote become lodged under or between heavy objects, for example sofa cushions. 7. If you have any questions concerning the operation of your terminal, contact your cable provider. User guide - Simplicity remote RT-SR50...
15. Using your remote control The operation of each button on your Simplicity remote control is as follows: Indicator Light Terminal power on/off Illuminates backlighting Recall last channel TV power on/off Video on demand programming Enter channel numbers (may vary with models)