Display Contrast - lntercomp SW500 User Manual

5. Press "2" to enter the Tire assembly weights and the Hub Plate weights. You will
be prompted to enter the 4 tire assembly weights one at a time. You will then be
prompted to enter the 4 Hub Plate weights one at a time. After doing this the
screen will return to the HUB MODE screen
Once HUB MODE has been enabled, the display will show "HUB COMPENSATION
ENABLED!" briefly at power-up whenever the indicator is turned on. This is a reminder
that the system is operating in this mode, and the weights are being compensated
accordingly.

Display Contrast

Adjusting the contrast can improve the readability of the display when viewed from
different angles. The display contrast is adjusted by holding down on the backlight
button and one of the wheel buttons together. If holding the RF or LF button with the
backlight button, the contrast will be increased. If holding down on the RR or LR button,
with the backlight button the contrast will be decreased.
SW500 Wired Scale Systems, Users
Page 10 of 36
Rev E,October, 2016