INEO-GW0802G
Switch 8-Port 10/100/1000T
with 2-Port Gigabit Combo SFP
Web Management Function
Quick Installation Guide
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 2 and 15 of FCC Rules.
These
limits
are
designed
to
reasonable
protection
against
harmful
interference when the equipment is operated
in
a
commercial
environment.
equipment generates and radiates radio
frequency energy and, if not installed and
used in accordance with the user's manual, it
may cause interference in which case users
will be required to correct interference at their
own expenses.
CE Warning
This is a Class A product.
In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
The Switch provides 8 10/100/1000Mbps
NWAY RJ-45 ports and can support 2 Combo
Gigabit SFP Open Slot to uplink.
designed for easy installation and high
performance in an environment where traffic
on the network and the number of user
increased continuously. With the newest
Gigabit chip set, Gigabit Ethernet switch can
fully support the highest speed without
hanging on problem even when Full-Duplex
is fully loaded.
The switch also provides automatic crossover
detection functionality on each port. It is
simple and friendly to up-link to another
switch without crossover cable.
This is specifically designed for medium to
large workgroups. The Switch can be installed
where space is limited; moreover it provides
smooth network migration and is easy to
upgrade the network capacity.
Key Features
Complies with the IEEE802.3 Ethernet,
IEEE802.3u Fast Ethernet and IEEE
802.3ab/z Gigabit Ethernet Standards
Provides 8 10/100/1000Mbps Gigabit
provide
switching ports and 2 Combo Gigabit SFP
Open Slot
This
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Store-and-forward operation support
Embedded 176K Bytes packet buffer
Provides 8K MAC address entry
Supports broadcast storm filtering
All ports provide Auto-Negotiation and Auto
-MDI/ MDI-X functions
Supports flow control: back pressure for
Half-duplex and IEEE 802.3x for Full-duplex
mode
Smart plug & play
Optional: 19" rack-mount Kits
It is
Package Contents
Before you start to install this Switch, please
verify your package contain the following
items:
One Gigabit Switch
One AC Power Cord
One CD ( User's Manual )
Note: If any of these items is missing or
damaged, please contact your local supplier for
replacement.
Front Panel (LEDs)
LED Indicators of 8
Port + 2 Combo
Gigabit SFP Open Slot Ethernet Switch
LED
Status
Description
No. Of
LED
Power
On
Power on
Power
1000M
On
1000Mbps
1-8
off
10/100Mbps
Link/ ACT On
Link
1~8
Flashing
Data activating
1~8
SFP Module is
On
7FX,8FX
connected
SFP
status
SFP Module is
Off
7FX,8FX
disconnected