24-Port GIGABIT ETHERNET WEB SMART SWITCH Chapter 1 Console port features overview Supports real time status (speed, duplex, link, flow control) of each port. Supports TX / RX / Drop / CRC / Collision counter for statistics. Supports port setting for enable or disable operation. Supports port setting for N-Way or force mode operation.
24-Port GIGABIT ETHERNET WEB SMART SWITCH Chapter 2 Hardware installation Accessories: One Null model cable One D-SUB 9 pin female connector on front panel Fiber module (optional)-multimode/singlemode (ST or SC type connector) Turn off the Smart Switch powers, and then connect the cable from PC Serial port to Smart Switch D-sub connector.
24-Port GIGABIT ETHERNET WEB SMART SWITCH Chapter 3 Software Setting Open Hyper Terminal Follow the steps to open the program. Step 1: Start Programs Accessories Communications HyperTerminal...
Page 6
24-Port GIGABIT ETHERNET WEB SMART SWITCH Step 2: Enter any name for new connection, and then press OK. Step 3: Choose serial port that you connect.
Page 7
24-Port GIGABIT ETHERNET WEB SMART SWITCH Step 4: Configuration COM port properties. Bits per second: 115200 Data bits: 8 Parity: None Stop bits: 1 Flow control: None...
Page 8
24-Port GIGABIT ETHERNET WEB SMART SWITCH Step 5: When your console port was set OK, you will see the login screen. The password of factory default: admin Step 6: When you login were successful, you will see the main menu screen.
Page 9
24-Port GIGABIT ETHERNET WEB SMART SWITCH The configuration on PC is successful. Please follow the instruction on the screen to do all the setting.