Installation; Charge The Battery; Sim Card - Zte WP652 User Manual

C h a p t e r

Installation

Charge the battery

1.Connect the desk charger with external AC socket via power adapter.
2.Put the phone on the desk charger. The charge spring of the desk charger should be inserted in the
apertures in the phone below.
3.Meanwhile, power indicator in the upper-right corner of the display blinks, indicating the charging is in
progress. While charging in power-off mode, the display only shows the charge indicator. If the battery
is completely flat, it may take a while before the charge indicator appears on the display or any call can
be made.
4.When the power indicator on the screen stops blinking, the charging is completed. The normal charging
time is 4 hours. In the process of charging, it is a normal phenomenon that the battery, phone and
charger get hot.
5.After the completion of charging, disconnect the charger from the phone and AC socket.
Notes:
The data interface in the phone below is only for updating the software of the phone, not for charging.
•
When charging the battery, place the phone in an environment with good ventilation and temperature
•
～＋
between 0℃ 45℃. Make sure to use the charger offered by the phone manufacturer. Using
unauthorized charger may cause danger and violate the guarantee articles.
When the phone is automatically switched off or indicates power shortage, charging the battery in time.
•
The standby time and the talk time of the phone are based on ideal working environment. In practice, the
•
working time of battery varies with network condition, working environment and application methods.
Please install the battery firstly before charging or using it.
•

SIM card

1. Power off the phone and remove other external power.
2. Press and push the back cover of the phone down to release and remove it.
3. Insert the SIM card into the SIM card slot of the phone or pull out SIM card out from the slot, as shown
in picture below.
4
Confidential and Proprietary Information of ZTE CORPORATION 4