Advertisement
Advertisement
Table of Contents
Related Manuals for Street Furniture Aria
Summary of Contents for Street Furniture Aria
- Page 1 Verison 1.0 12 November 2018...
- Page 2 As Aria and its components are a modular system, there are many Your Aria configuration comes with a code to identify its layout. It is important to understand this to ensure the configurations that can be customised. The following installation guide right components are received and layout is successful.
-
Page 3: Part Descriptions
• Surface fixing bolts (DynaBolts recommended). 540mm 1140mm 1740mm © Street Furniture Australia Pty Limited ABN 46 070 910 100 Australia 1800 027 799 Email info@streetfurniture.com United States +1 877 406 6434 N6 391 Park Road, Regents Park International +61 2 8774 8888 streetfurniture.com... - Page 4 Fig. 1 Fig. 2 HOW TO ATTACH LEGS In some cases your Aria System is delivered with the axle and legs unattached to ensure safe delivery. Please follow the assembly steps below. Check you have all suitable legs, axle lengths and fasteners before starting (this information will be provided separately based on your order).
- Page 5 (2/3) HOW TO CONNECT PANELS If your Aria configuration includes the connector panels shown below, please follow the steps below. C180 Position all seats and benches according to the specified layout. Attach all connector panels as shown in Fig 1.
- Page 6 Once the power is connected and working the table can be fixed into place. With PowerMe Table fixed in position - assemble the Aria Seats or Benches into place according to your configuration as seen in Fig. 2.
-
Page 7: Additional Information
POWERME™ TABLE CONDUIT LOCATIONS If your Aria configuration includes multiple PowerMe Tables you will receive a coordinate map, similar to the figure on the right, to enable correct location of an underground electrical conduit to provide power to the tables.
Need help?
Do you have a question about the Aria and is the answer not in the manual?
Questions and answers