Changing The Opening Screen - Scion PT546-00080 Owner's Manual

PRESET1
28
PRESET3-6
Changing the
Opening Screen
With the main unit switched on
after pressing the Power button,
once the key is turned from the
ACC position to the off position and
POWER
back to ACC again, "Scion" is dis-
played as the Opening Screen.
Users can edit the text themselves
to make another Opening Screen,
as an alternate to the default
MUTE
"Scion" display. Up to a maximum
of 16 characters can be displayed.
The procedure is described below.
1 Moving to "Customize Mode"
to Enable Editing
1 With the main unit on, turn the
key from the ACC position to the
off position.
2 On the main unit, press and hold
MUTE button then turn the key to
ACC. The horizontal line in the LCD
display will start flashing.
3 Within 15 sec. after confirming
the horizontal line is flashing, press
and hold the PRESET 1 button
then turn the key to OFF position.
(If 15 sec. elapses before you com-
plete the button presses, "TIME
OUT" will be displayed and the
unit will beep twice. If this occurs,
repeat the procedure from Step 1).
This completes shifting to the cus-
tomize mode.