What's On The Back Panel - Scientific Atlanta Explorer 8300 Connecting Manual

What's On the Back Panel?

8
THIS DEVICE IS INTENDED TO BE ATTACHED
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
CABLE
IN ANY OTHER FASHION MAY CAUSE
IN
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
OF THE FCC RULES, PART 15.
CATV CONVERTER
MADE IN MEXICO
1
T11274
1 Cable In Connect the coaxial cable that delivers the signal
from
2 Cable Out Connect a coaxial cable to Cable Out to send
analog
TV or VCR. These
definition TV (SDTV) video and
audio.
3 Audio Out Connect RCA cables to Audio Out to send analog
(LEFT and RIGHT) audio signals (left and right) to a TV with stereo
outputs.
4 Video Out Connect to video input of TV or VCR.
5 Digital Audio Connect an RCA cable to send a digital audio signal
Out to a surround-sound receiver or other digital audio
6 Secondary Video Connect to either a VCR for archiving saved content
and Audio Out from the 8300 DVR or connect to another set of
inputs
7 S-Video Out Connect an S-Video cable to send an S-Video
signal
VCR. This signal is standard definition
quality than other SDTV connections.
8 IR (This connector reserved for future use.)
9 SATA Connect to an external Serial ATA (SATA) hard disk
hard
DVR.
10 AC Outlet Connect the AC power cord from another device,
such
11 AC Power Input Connect the power cord to deliver power to the 8300
DVR.
CABLE
OUT
OUT 1 OUT 2
A
U
IR
L
D
I
O
TV
R
S - VIDEO
VIDEO DIGITAL VIDEO
OUT
AUDIO OUT
2 3 4 5 6 7
your cable service provider.
audio and
device.
(composite) on your TV.
(LEFT and RIGHT)
drive for expanded recording capacity. Check with
your cable service provider for a list of approved
drive models for use with the 8300
as a TV.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS: RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
120 VAC 120 VAC
60HZ 5A 60HZ 80W
SATA
LISTED 14H1
CABLE EQUIP.
8 9 10 11
video signals to a
signals are standard-
stereo
to your TV or
but higher