Advertisement
Programming:
prog new
Programming may be done for each day or
for a group of days. In this case instructions are
common to several days.
Days: 1 = Monday, 2 = Tuesday, 3 = Wednesday...
7 = Sunday.
1. Select the prog mode using menu, then enter.
2. Select the channel (A or B) using
The number of remaining program steps appears
for a short time.
3. Choose the day(s) using
+
or -. Validate with enter.
4. ok flashes. Use
enter
to validate the group of
days.
-
or
makes it possible to reset the group of
days if necessary
5. Using
+
or -, select the state of the instruction:
On, Off or
. Press
ok
to validate the state.
6. Enter the time of switch-on using
Validate with ok.
7. Enter minutes with
+
or -. Validate with ok.
8. For On
, set the duration (seconds, then
minutes) in the same way as for the switch-on
schedule.
Program the other instructions of the group of
days by repeating operations 3 to 8.
The day or the group of days may be modified at
the during step 3 by pressing the
At the end of programming return to auto mode
using the
menu
button.
To set the program of the other channel, return to prog
new mode and proceed according to steps 2 to 8.
In this mode it is also possible to add an instruction to
the program set up.
Proceed as described above.
Display
To check the daily profile set up without the risk of
modification or deletion:
Select the mode
using
menu
Select the channel (C1 or C2) using
The first step of Monday is displayed as well as
the daily profile.
Two options available for display:
1. Pressing repeatedly
+
or
-
: lets you shift days.
In this case only the first daily step is displayed as
well as the daily profile.
2. Pressing ok: all steps of each day appear one
after the other.
Modification or clearing of a program
step:
prog modif
Select the prog mode with
menu
Select the channel (C1 or C2) using
Select the modif mode with
+
or -.
Validate with enter.
The number of remaining program steps appears for
a short time.
The first step of the first day or group of days
appears.
Repeatedly pressing the
enter
key displays all pro-
grammed steps one at a time.
Any flashing field (state, hour, minutes) may be modi-
fied using
+
or -, then validated with enter.
When the cursor is positioned on
the group of days, you may display successively the
days or the groups of days and switch directly to the
one that has to be modified using
To remove a program step: select the state of the
channel (One, Off or
), press simultaneously
Clear appears on the screen. Validate with enter.
Key
As soon as the key appears on the switch
appear on the screen.
Two types of operation:
A. Permanent override:
Insert the key into the switch.
After 10 seconds the program contained in the key
will be executed without clearing the program contai-
ned in the time switch.
As soon as the key is removed the program of the
time switch is again valid.
B. Copy (load) / Save (save):
The key makes it possible to save a program contai-
ned in the time switch.
+
or -, then enter.
It is also possible to copy the contents of the key into
the clock.
1. Insert the key and wait for 2 sec.
2. Using menu select the mode:
save to save a program contained in the time
switch,
load to load the program of the key into the time
switch,
key.
3. Validate the selection with enter.
+
or -.
4. For save and load reconfirm with enter.
The following error messages may appear
on the screen:
no prog: the key is empty, it does not contain any
program.
Error: the key is that of a one-channel switch.
In these two cases:
● Only the save save is possible.
● The error message remains on display as long as
+
-
or
.
,
the key is present, but in this case the program of
the time switch is executed.
Setting time and day
Winter / summer time change
Select the mode
Modify the day, month, year, the hour and the
minutes using
The time switch next suggests the winter / summer
time changes
and press enter.
Select the type of change desired using
+
or
-
and enter.
Validate with enter.
The type of change depends on the geographical
zone.
Types available:
Type
Start of time
change Summer change Winter
Euro Last Sunday
of March
*
USA First Sunday
of April
GB
Last Sunday
of March
and press enter.
USER Date freely
+
or
-
and enter.
programmed
No
No
change
* type according defect
The change always takes place between 2:00 and
3:00 a.m.
When the USER type is selected:
1. Enter the day then the month of the date of chan-
ge of the summer time (+ 1hour) with
enter.
OK
located behind
2. Enter the day then the month of the date of chan-
ge of the winter time (- 1hour) with
enter.
+
or -.
The time switch will check which days of which
weeks correspond to these dates and will apply
+
and -.
changes to the same periods for the following years
independently of the date.
to check the program contained in the
with
menu
then enter.
+
or
-
and enter.
.
+
or -.
Start of time
Zone
of application
Last Sunday
European Union
of October
Last Sunday
North America
of October
Fourth Sunday
Only for the
of October
United Kingdom
Date freely
programmed
No
change
+
or
-
+
or
-
and
Holidays
Allows you to override the output, On or Off for a
given period.
Once done, this override will be removed and will
not be carried over to the following year.
Select the mode
using
Select the channel (C1 or C2) using
With
+
or -, select the state of override: On or Off,
ok
to validate.
Enter the day then the month of the starting period
(date 1) using
+
or
-
then enter.
Enter in the same way the day and the month of the
ending period (date 2).
In auto mode,
flashes to indicate that a period of
holidays was programmed.
becomes permanent during the period.
The override will be effective at 0:00 of the 1st date
until 23:59 from the 2nd date.
If date 1 is set before the day of programming, the
period of holidays is valid for the following year.
To clear a period of holidays return to the mode,
press simultaneously the
Clear appears. Confirm with enter.
Override -
Random operation
Pressing repeatedly
If the state of the output is On:
1
st
pressure:
temporary waiver. Off and
flash. The next program step will let
you return to the automatic mode.
2
pressure: permanent override. On and
nd
permanent. This override
must be cancelled manually.
3
rd
pressure: permanent override. Off and
permanent. This override must
be cancelled manually.
4
pressure: random operation. Simulation of pre-
th
sence,
output are displayed. Must be cancel-
led manually.
In this case the steps of the program
are shifted randomly within a range of
± 59 min.
5
th
pressure: return to the automatic mode.
Locking
To prevent all undesirable actions, the keyboard
of the time switch may be locked using a key
réf. 23892 or pressing the
for 7 seconds.
Unlocking is done in the same way.
and
menu
then enter.
+
or
-
and enter.
+
and
-
keys.
-.
are
are
as well as the state of the
enter
and
keys
Advertisement
