MYDLINK DCH-S161 Quick Start Manual

1
Connect the sensor cable to the bottom of the water sensor.
x 2
2
Scan the QR code above to download the mydlink app for your
Android or iOS device.
Note: This product is NOT COMPATIBLE with mydlink Lite.
Remove the battery cover by gently pressing down on the tab.
If you are a mydlink Lite user, sign in to the new app with the same
Insert the two AA batteries and reattach battery cover.
username and password and your existing cameras will appear in the
new app.
4
3

New Users:

Tap Sign Up to register for a mydlink account, then tap Add
a Device to install your water sensor. Continue to follow the
onscreen instructions.
OR

Existing Users:

Sign in using your mydlink account and tap the icon at the top
left, then tap Add a Device to start the setup wizard. Continue
to follow the onscreen instructions.
5
Model: DCH-S161
SN: LLPP1XXXXX
Wi-Fi Name(SSID): DCH-S161 -XXXX
Wi-Fi Password: XXXXXXX
PIN Code: XXXXXX
mydlink No.: XXXXXXX
Tap Yes to scan the setup code on the back of the DCH-S161.
Continue to follow the onscreen instructions to complete
the setup process.
Note: Please ensure that your mobile device is connected
to the same Wi-Fi network of the router that you plan on
connecting the DCH-S161 to.